Is the resistance between 0.6-2.0 Ohms?
Check for loose terminals in the active damper control unit connector A (20P). If the terminals are OK, replace the active damper control unit
See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and Modules - Suspension/Suspension Control Module/Service
and Repair, then go to step 19.
Go to step 15.
15. Disconnect the appropriate damper coil 2P connector.
16. Check for continuity between the appropriate active damper control unit connector A (20P) terminal and appropriate damper coil 2P
connector terminal No. 1 (see table).