Friday, February 7, 2020

2010 Acura Truck MDX V6-3.7L Page 665


1. Turn the ignition switch to LOCK (0).



2. Disconnect SH-AWD control unit connector A (20P).



3. Check for continuity between SH-AWD control unit connector terminals A1 and A11.



Is there continuity?



YES -



Go to step 4.



NO -



Go to step 7.



4. Check the REAR DIFFERENTIAL FLUID TEMPERATURE in the DATA LIST is above 68 掳F (20 掳C) with the HDS before proceeding



to the next step. If the temperature is below 68 掳F (20 掳C), drive the vehicle to warm up the rear differential until the fluid temperature



becomes above 68 掳F (20 掳C).



5. Measure the resistance between SH-AWD control unit connector terminals A1 and A11.



Is there 2.0 Ohms or more?



YES -



Go to step 6.



NO -



Go to step 9.



6. Check for continuity between SH-AWD control unit connector terminal A1 and body ground.

No comments:

Post a Comment