Friday, February 14, 2020

2010 Acura Truck MDX V6-3.7L Page 598


Is the resistance as specified?



YES -



Faulty SRS unit or poor connection at SRS unit connector B (39P) and the SRS unit. Check the connection between the connector and the SRS



unit. If the connection is OK, replace the SRS unit See: Relays and Modules/Relays and Modules - Restraints and Safety Systems/Air Bag Control



Module/Service and Repair/SRS Unit Replacement.?



NO -



Open in the front passenger's seat wire harness, floor wire harness, or poor connection. Check the connection; if the connection is OK, replace the



faulty harness.?



18. Turn the ignition switch to LOCK (0).



19. Disconnect the front passenger's seat wire harness 3P connector (A) from the front passenger's seat belt buckle switch 3P connector (B).



20. Unbuckle the front passenger's seat belt.



21. Measure the resistance body ground and between front passenger's seat wire harness 3P connector terminal No. 3. There should be less than



1.0 Ohms.



Is the resistance as specified?

No comments:

Post a Comment